5 Easy Ways You Can Turn BEST ROOFING COMPANIES Into Success

When was the last time the roof of your building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as leaks, while some produce subtle signs which are only detectable on the surface. In either case, leaving the problems unaddressed can cost you a small fortune once you finally repair them. If the roof on your building has the problems listed below, a company that focuses on commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle due to weather damage and poor installation. Whatever the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels begin to fall off, often coming off in large sections when a storm hits. Buckled panels are probably one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that contain the panels in place. This creates an area where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the problem is costly to fix.

Blistering

Roof Cleaning in Peterborough and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and invite water to seep beneath the bitumen. After the blisters form, hot weather typically makes them worse. Due to the humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping can cause water to gather in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more technical. Often, installing a taper insulation system to determine a new slope is best solution. During the rainy season, resolving ponding water is among the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as for example chimneys and vents. As time passes, most flashing must be resealed. If it is not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.

Missing Mortar

Chimneys and high elements of brick walls that have sections of missing mortar could cause leaks. These leaks are often recognised incorrectly as leaks in the roof membrane, but a thorough inspection by a company that specializes in commercial roofing will reveal the real problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.

Conclusion

The problems above are some of the most common known reasons for roof repair. If they are corrected early, most problems are cheap to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is best way to ensure problems are detected early.

Leave a Reply

Your email address will not be published. Required fields are marked *